Filter
Top Products
Special Operations under Windows
136
5
A
Formulate the printer's IP address
or the host name of the hosts file
printer as an argument and use
the "ftp" command.
% ftp printer's IP address
B
Enter the user name and pass-
word, and then press the {# Enter}
key.
To use the default account, enter
“admin” as user name, and leave
the password blank.
User:
Password:
When user authentication is set,
enter a login user name and pass-
word.
C
When printing a binary file, set
the file mode to binary.
ftp> bin
When printing a binary file in AS-
CII mode, print may not come out
correctly.
D
Specify files to be printed.
The following shows the examples
of printing a PostScript file named
"file 1" in the "C:\PRINT" directory
and printing file 1 and file 2.
ftp> put C:\PRINT\file1
filetype=RPS
ftp> mput C:\PRINT\file1
C:\PRINT\file2
E
Quit ftp.
ftp> bye
Note
❒ “=”, “,”, “_”, and “;”cannot be
used for filenames. File names
will be read as option strings.
❒ For “mput” command, option
can not be defined.
❒ For “mput” command, “*” and
“?” can be used as wild cards in
file names.
❒ When printing a binary file in
ASCII mode, print may not
come out correctly.