Ricoh 2075 All in One Printer User Manual


 
Configuring the Network
37
2
C
CC
C
Press the [Interface Settings] key.
D
DD
D
Make the [Effective Protocol] settings.
Note
You must configure IP address for using TCP/IP protocol. Consult the net-
work administrator for help with the address. You don't have to configure
it if Network Boot is DHCP.
Press the [Invalid] key for redundant protocols.
Press the [Effective] key for TCP/IP protocol when you use pure IP of Net-
Ware 5/5.1.
A Make sure that the [
Network
] key is selected, and then press the [
Effective
Protocol] key.
B Press the [Effective] or [Invalid] key for each protocol.
C Press the [OK] key.
The following operation will be different, according to each protocol.
When using TCP/IP
A Make sure that the [
Network
] key is selected, and then press the [
IP Ad-
dress] key.
B Use the number keys to enter the IP address.
Note
Press the [
] or [
] key to move in 3-digit increments.
Press the [Clear] key if the wrong address is entered.
C Press the [OK] key.
D Make the [
Sub-net Mask
] and [
Gateway Address
] settings. For each item,
press the corresponding button on the screen shown in step A
AA
A, and then
perform the same procedure as described in steps B
BB
B and C
CC
C.
MartiniC1_GBzen2_FM.book Page 37 Friday, April 19, 2002 2:18 PM