Riverstone Networks RS 2100 Network Router User Manual


 
2-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide
Specifications RS 2100 Introduction
2.2 SPECIFICATIONS
The RS 2100 provides high-speed switching and full non-blocking throughput. The hardware provides high-speed
performance regardless of the performance monitoring, filtering, and Quality of Service (QoS) features enabled by the
software.
The following table lists the basic hardware and software specifications for the RS 2100.
Table 2-2 Basic hardware and software specifications
Feature Specification
Throughput
8.0-Gbps non-blocking switching fabric
9.2 million packets-per-second routing throughput
Capacity
Up to 50,000 routes
Up to 256,000 Layer-4 application flows
Up to 240,000 Layer-2 MAC addresses
4,096 Virtual LANs (VLANs)
2,000 Layer-2 security and access-control filters
3MB input/output buffering per gigabit port
Routing protocols
IP: RIP v1/v2, OSPF, BGP v2/v3/v4, IS-IS
IPX: RIP, SAP
Multicast: IGMP, DVMRP, GARP/GVRP
Network Address Translation
Server Load Balancing
Transparent Web Caching
Bridging and VLAN
protocols
802.1d Spanning Tree
802.1Q (VLAN trunking)
Rapid Spanning Tree Protocol (RSTP)
Per-VLAN Spanning Tree (PVST)
Media Interface
protocols
802.3z (1000Base-SX)
Quality of Service
(QoS)
Layer-2 prioritization (802.1p)
Layer-3 source-destination flows
Layer-4 source-destination flows
Layer-4 application flows
RMON
RMON v1/v2 for each port
Management
SNMP v1/v2
Emacs-like Command Line Interface (CLI)
Port mirroring
Traffic to specific gigabit ports