Riverstone Networks RS 2100 Network Router User Manual


 
Riverstone Networks RS 2100 Switch Router Getting Started Guide 4-3
RS 2100 Initial Configuration Powering on the RS 2100
5. As prompted, press Return (or Enter) to activate the Command Line Interface (CLI) on the console.
Note If prompted for a password, simply press the Return key. The default passwords
are blank.
Note If the message “SYS-E-NOFLASHCARD” appears while booting the RS 2100, the
system has not detected its internal flash memory. If this occurs, reboot the system.
If the system still does not recognize its memory, contact Riverstone Networks
Technical Support.