Riverstone Networks RS 2100 Network Router User Manual


 
Riverstone Networks RS 2100 Switch Router Getting Started Guide 4-21
RS 2100 Initial Configuration Setting the SYSLOG Parameters
Note The <facility-type> is a string of the form: user, kern, or local0 through local7.
These strings are reserved by the SYSLOG server daemon. for information on
how <facility-type> is used by the SYSLOG server, see the documentation for
your server’s syslog.conf file.
Here is an example:
5. To activate the SYSLOG commands, use the save active command. Enter yes to activate the
changes.
rs# config
rs(config)# system set syslog server 16.50.11.12
rs(config)# system set syslog level info
rs(config)# system set syslog facility local0