Filter
Top Products
17
2-2 Installing
2. Preparing the Machine
Storing the Head Retainer and Screws
You can store the head retainer and the screws (X and Y) at locations designated for each.
Store the X screws that secured the table in place at the location the figure below.
Use two Y screws to attach the head retainer, and two more to attach the AC adapter holder. Store the remaining two screws
by screwing them into the screw holes shown in the figure.
☞
See "2-3 Connecting the Cables."
Store the head retainer by attaching it to the back of the machine as shown in the figure.
X screws
Y screws
The back of the machine