Filter
Top Products
2. Preparing the Machine
24
2-4 Installing and Setting Up the Software
Windows Me/98 SE
1
Before you start installation, make sure the machine
and your computer are not connected by the USB
cable.
2
Start Windows.
3
Insert the Roland Software Package CD-ROM into
the CD-ROM drive.
The window shown in the figure appears automati-
cally.
4
Switch on the machine.
Wait a short while until the lights stop flashing.
The flashing continues for about one minute.
From this point on, keep the door closed until installa-
tion ends. Failure to do so switches off the power, which
may prevent installation from completing correctly.
5
Connect the included USB cable.
The [Add New Hardware Wizard] dialog box appears.
6
• Windows Me
Choose [Automatic search for a better driver (Recommended)], and click [Next].
• Windows 98 SE
Click [Next].
USB connector
USB port
USB cable
Computer
The back of
the machine
Press the power button.
These lights flash clockwise
two at a time.
Windows Me Windows 98 SE