Filter
Top Products
56
5. What to Do If...
5-2 When Moving the Machine
When you move the machine to another location, you secure the table and the head in place.
Procedure
1
Make sure the power to the machine is turned off, then detach the AC adapter, the USB cable, and the power
cord.
2
Remove the AC adapter holder and the head retainer.
Use the removed screws to secure the head retainer and the head in place.
3
Open the door, then move the head to the location shown in the figure below.
➢ Be sure to use the handle when opening the door.
➢ Needlessly touching anything other than the knob may cause malfunction. Carry out this operation carefully.
Holding the knob, lower the
head all the way.
Grasp the knob and turn in the direction of the
arrow until it reaches the position where it strikes
the surface at the back of the machine.
AC adaptor holder
Y screws
The back of the machine
Y screws
Head retainer
Knob