Filter
Top Products
21
Part 2 Performing Marking
Decide on the Size and Shape of the Workpiece
Enter the size (outer dimensions) of the workpiece, and choose the shape.
In this example, enter a size of 30 mm by 30 (1-1/8 in. by 1-1/8) shape, and choose a circle as the shape.
1
From the [File] menu, click [New...].
The [Material Setup] dialog box appears.
2
Enter the outer dimensions of the workpiece.
Here, enter "30" for both [Height] and [Width].
3
Choose the shape of the workpiece.
If the shape is a circle (ellipse), quadrilateral or
diamond, click the corresponding shape icon. To
choose another registered shape, click [Other...].
In this example, click
.
Tip
To register a shape that is not listed, click [Add...]. For
more information, see Part 3, "Adding a Workpiece
Shape."
4
Click [OK].