Filter
Top Products
6
Part 1 What to Do Before Marking
Part Names
Cover
Close the cover when performing marking.
Base
You can detach this from the machine.
A workpiece is loaded on the base. You can secure it
in place without using commercially available
adhesive tape.
STANDBY LED
This lights up when the power is on.
When it is flashing, it indicates that an error has
occurred.
[STANDBY] key
This switches the power on and off.
AC adapter jack
This is for connecting the included AC adapter.
Parallel connector
This is for connecting a commercially available printer
cable (sold separately).
Don't change the DIP switch setting.