Filter
Top Products
44
Part 4 Maintenance
5
When you use a neutral detergent, rinse thoroughly
with water so that no detergent remains on the surface
of the sheet.
6
Allow the adhesive sheet to dry. Place out of direct
sunlight until completely dry.
Never mount on the base while still wet.
7
With the scale facing up, align the rounded corner on
the adhesive sheet with the upper-right corner of the
base and set it in place. Place the sheet so that both
rounded corners are at the top of the base.
Be careful not to allow any air bubbles to be trapped
between the base and the adhesive sheet.
8
Press down gently on the adhesive sheet at the center
and the four corners.
Replacing the Head
The head of Metaza is a consumable part. If the tip of the head becomes dull, replace with a new head.
For replacement parts, contact your local authorized Roland DG Corp. dealer or service center.
Cleaning the body and cover
Use a cloth moistened with water then wrung well, and wipe gently to clean.
The surface of the cover is easily scratched, so use as soft cloth.