Filter
Top Products
38
Frame Column
The Frame column displays the frame affected by the warning or alarm.
Alarm Time Column
The Alarm Time column displays the date and time (in 24-hour clock time) the alarm or warning occurred.
Resolved Time Column
The Resolved Time column displays the date and time (in 24-hour clock time) the alarm or warning was resolved.
Description Column
The Description column displays a description of the alarm or warning.
Hiding and Clearing Alarms
Some alarms can be cleared, as shown in the example below. Other alarms, such as loss of the backplane clock, can be hidden
but cannot be cleared. The only way to clear these alarms from the window is to resolve them.
Example: Lost communications with the Trunk Master. In this case, the alarm is not regenerated unless the alarm
condition is resolved, and then recurs. This means the Master Controller starts communicating with the
Trunk Master again, and then loses communications again.
NOTE: You can also hide certain alarm type by selecting Hide this alarm type, if desired.
To hide or clear alarms/alarm types out of the Intercom Alarms window, do the following:
1. Right-click the alarm you want to clear.
A popup menu appears.
2. From the popup menu, select Hide this alarm, Clear this alarm or Hide this alarm type.