Runco VX-44D Projector User Manual


 
Operation
72 Runco VX-44d/-55d Installation/Operation Manual
PRE
L
IMINAR
Y
Display Device - Configure: The options in the Display Device - Configure menu allow
you to change the picture orientation, perform lens adjustments or access other,
display-device specific functions.
•Installation – Orientation: Select Installation from the Display Device - Configure
menu, then select Orientation to change the picture orientation to suit the method of
installation (Floor Front, Floor Rear, Ceiling Front or Ceiling Rear).
•Installation – Vertical Keystone: Projector placement and other factors can cause
geometric distortion in the projected image. To correct this, select
Vertical Keystone
from the Installation menu and use the or button to make the image rectangular.
See Figure 4-8.
Figure 4-8. Keystone Correction
Lens: Select Lens from the Display Device - Configure menu to access the motorized
lens controls. Refer to Primary Lens Adjustments on page 41.
Lamp Info: Select Lamp Info from the Display Device - Configure menu to obtain
information about the currently-installed lamp: its serial number and number of hours in
use.
Runco recommends that the keystone feature not be used unless
absolutely necessary, as it may cause artifacts in the image.
You can also obtain this information using the VX-44d/-55d built-in
keypad. For more information, refer to
Working With the Lamp
on page 49.
Tip
Positive values
compress top.
Negative values
compress bottom.
-+
Vertical Keystone Correction
Note