Filter
Top Products
Basic copying
59
2. Menu Overview and Basic Setup
Darkness
If you have an original containing faint marking and dark images, you can adjust
the brightness to make a copy that is easier to read.
1
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select (copy) on the control panel.
2
Select (Menu) > Copy Feature > Darkness on the control panel.
3
Select the option you want and press OK.
For example, the Light+5 being the lightest, and the Dark+5 being the
darkest.
4
Press (Stop/Clear) to return to ready mode.
Darkness
The Darkness menu lets you increase or decrease the difference between the
bright and dark areas of an image.
1
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select (copy) on the control panel.
2
Select (Menu) > Copy Feature > Darkness on the control panel.
3
Select the option you want and press OK.
4
Press (Stop/Clear) to return to ready mode.
Original
The original setting is used to improve the copy quality by selecting the
document for the current copy job.
1
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select (copy) on the control panel.
2
Select (Menu) > Copy Feature > Original Type on the control panel.
3
Select the option you want and press OK.
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
If texts in the printout is blurry, select Text to get the clear texts.
• Photo: Use when the originals are photographs.
• Magazine: Use when the originals are magazine.
4
Press (Stop/Clear) to return to ready mode.