Filter
Top Products
Disassembly and Reassembly
3-5
Samsung Electronics
1. Remove two screws and remove the controller
cover.
2. Remove two screws at the back of the printer and
unplug one connector from the board, then open
the rear cover.
3. Open the printer cover, and open the MP tray.
4. Remove two screws securing the main cover.
5. Unlatch the front ends of the cover.
|6. Slide the main cover upward, out of the printer.
3-5 Main Cover
Note that the power
switch and the power
connecter are properly
released when you
remove the cover.