Filter
Top Products
Disassembly and Reassembly
3-10
Samsung Electronics
1. Before you remove the fuser, you should remov
e:
-Main Cover (see page 3-5)
2. Remove four screws and unplug one conne-
ctor, and then remove the fuser assembly.
♦ To remove the thermostat from the fuser
assembly
Remove two screws and take the thermostat out.
♦ To remove the thermistor from the fuser
assembly :
Remove one screw, and release the wire from the
three holders, and then take the thermistor out.
♦ To remove the halogen lamp from the fuser
assembly :
Remove two screws and take the halogen lamp
out of the fuser assembly.
Note When you reassemble the halogen
lamp, make sure that it is inserted into
the slot properly.
3-13 Fuser Assembly