Filter
Top Products
Disassembly and Reassembly
3-14
Samsung Electronics
1. Before you remove the engine board, you should
remove:
-Main Cover (see page 3-5)
2. Remove six screws from the left and the right base
bracket and take them out.
3. Remove eight screws securing the PCU shield and
remove two screws securing the SCF connector, and
then take the PCU shield out of the printer.
4. While you push the latch to release the PCU shield,
take the PCU shield out of the printer.
5. Unplug all connectors from the PCU shield, and
remove the shield.
3-16 Engine Board and Miscellaneous