Filter
Top Products
P
APER
H
ANDLING
3.5
3
You can load letterhead paper with the design side facing up.
The top edge of the sheet with the logo should be placed at the
right side.
For details on loading paper in the cassette, see page 1.17.
After loading paper in the cassette, you need to set the correct
paper size using the control panel buttons. See page 1.20.
NOTES:
•When you print a file from your PC using the paper cassette,
make sure that you select the Paper source and the correct
paper size from your software application before starting your
print job.
• If you experience problem with the paper feed, place the paper
in the Bypass Tray.
•You can load up to 300 sheets
of previously printed paper.
The printed side should be
facing down with the uncurled
edge at the right side. If you
experience problems with the
paper feed, turn the paper
around. Note that the print
quality is not guaranteed.