Filter
Top Products
C
OPYING
4.10
Clone Copying
The Clone feature prints multiple image copies on a single page.
The number of images is automatically determined by the
original image size, so you are unable to adjust the copy size.
This special copy mode is available only when using the
document scanner glass. If a document is detected on the ADF,
the Clone option will not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
To enter the special copy mode, SCX-5315F users should
press Special Copy in the Copy mode (see page 4.5) and
SCX-5115 users should press Autofit/Clone.
4
Press Special Copy (Autofit/Clone on SCX-5115)
repeatedly or use the navigation buttons until “CLONE”
appears on the bottom line of the display.
5
Press Mode/Enter (Enter on SCX-5115) to save the
selection.
6
If necessary, customise the copy settings including the
number of copies, contrast and image type using the
control panel buttons. See “Setting Copy Options” on
page 4.6.
NOTE:
You cannot adjust the copy size using the Zoom button
while making a clone.
7
Press Copy/Start to begin copying.
8
When the copying is completed, press Stop/Clear to
cancel the Clone mode.