Filter
Top Products
T
ROUBLESHOOTING
8.6
Fuser Area
If the paper jammed in the fuser area, “PAPER JAM 1” appears
on the display:
NOTE:
The fuser area is hot. Take care when removing paper
from the machine.
1
Lift the release lever to open the side cover.
2
Pull down on the fuser lever as shown below.
This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
NOTE:
Do not pull paper up through the fusing unit. Unfused
toner may adhere in the area, resulting in smudged copies.
3
Remove the jammed paper, in the direction shown.