Filter
Top Products
C
OPYING
4.3
4
Making Copies from the Automatic
Document Feeder
Using the ADF (Automatic Document Feeder), you can load up
to 30 documents (20lb, 75 g/m
2
) in one job. Ensure that
documents are in good condition, that they have the same
thickness and weight, and that all of the staples and paper clips
have been removed.
1
Feed the documents (up to 30 pages) face up into the ADF
and adjust the document guides to the document size.
Make sure that the bottom of the document stack matches
the paper size marked on the ADF.
2
SCX-5315F users should verify that the machine is in the
Copy mode. If necessary, press Mode/Enter to change the
mode to Copy mode. In Copy mode, the LCD display shows:
Note that you cannot make copies in Fax mode. The
machine will sounds an error beep.
3
Make sure that you have selected the required paper tray.
See page 4.2.
4
Customise the copy settings including the number of copies,
copy size, contrast and image type using the control panel
buttons. See “Setting Copy Options” on page 4.6.
To clear the settings, use the Stop/Clear button.
5
If necessary, you can use special copy features, such as
collation and duplex copying.
Document guides
Copy size
Number of copies