Filter
Top Products
P
APER
H
ANDLING
3.9
3
Setting the Paper Size for Copying
After loading paper in the paper Tray or the Multi-Purpose Tray,
you need to set the correct paper size using the control panel
buttons. These settings will apply to the Copy mode, and the Fax
mode (SCX-5315F only). In PC printing mode, you have to select
the paper size in the application program you use.
To set the paper size for Tray, take the following steps:
1
Press Menu/Exit and then System Data from the one-
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
The display shows “CASSETTE PAPER” on the top line and
the available options on the bottom line. The current setting
blinks.
2
Use
or
to select the paper size you are using, and press
Mode/Enter (Enter for SCX-5115) to save the selection.
You can press the corresponding number shown on the
display to select the paper size.
3
To return to Standby mode, press Stop/Clear.
To set the paper size for the Multi-Purpose Tray, take the
following steps:
1
Press Menu/Exit and then System Data from the one-
touch dial keypad. SCX-5115 users should press Menu and
then Enter.
The display shows “CASSETTE PAPER” on the top line and
the available options on the bottom line.
2
Use
to display “BYPASS TRAY” on the top line. The
available options appear on the bottom line and the current
setting blinks.
3
Use
or
to select the paper size you are using, and press
Mode/Enter (Enter for SCX-5115) to save it.
You can press the corresponding number shown on the
display to select the paper size.
4
To return to Standby mode, press Stop/Clear.