Filter
Top Products
9.7 <
Faxing (SCX-5530FN only)>
Sending a delayed fax
You can set your machine to send a fax at a later time when you will not
be present.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Delay Send appears and press OK.
6 Enter the number of the receiving machine using the number
keypad.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.2.
7 Press OK to confirm the number. The display asks you to enter
another fax number to which to send the document.
8 To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
Note
You cannot use group dial numbers for another fax number.
9 When you have finished entering fax numbers, press
the Scroll
buttons to select No at the Another No.? prompt and press OK.
10 Enter the job name you want and press OK.
For details on how to enter alphanumeric characters, see page 2.3.
If you do not want to assign a name, skip this step.
11 Enter the time using the number keypad and press OK or Start.
Note
If you set a time earlier than the current time, the fax will be
sent at that time on the following day.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
12 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine returns to Standby mode. The display reminds you
that you are in Standby mode and that a delayed fax is set.
Adding pages to a delayed fax
You can add pages to the delayed transmissions previously reserved in
your machine’s memory.
1 Load the originals to be added and adjust document settings.
2 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3 Press OK when Add Page appears.
4 Press the Scroll buttons until the fax job you want appears and
press OK.
The machine scans the original into memory and shows the total
number of pages and the number of the added pages.
Canceling a delayed fax
1 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
2 Press the Scroll buttons until Cancel Job appears and press OK.
3 Press the Scroll buttons until the fax job you want appears and
press OK.
4 Press OK when Yes appears.
The selected fax is deleted from memory.
Sending a priority fax
Using the Priority Fax feature, a high priority fax can be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a Multiple Send operation
between stations (i.e., when the transmission to station A ends, before
transmission to station B begins) or between redial attempts.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Priority Send appears and press OK.
6 Enter the number of the receiving machine.
You can use speed buttons or speed dial numbers. For details, see
page 10.2.
7 Press OK to confirm the number.