Sanyo PLC-XK3010 Projector User Manual


  Open as PDF
of 77
 
36


Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should
be selected through menu operation as described below.
1
2
Video

Direct Operation
When video input signal is connected to the
VIDEO jack, select Video.
Video
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a S-video-VGA cable, select S-video.
S-video

When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).


Press the MENU button to display the On-Screen

and then press the Point or the SELECT button.
Video and then
press the SELECT button.

Video
S-video
Computer 1. And
then press the Point to access the submenu
itemsS-video
and then press the SELECT button.
Computer
1
Menu Operation
S-video

select S-video.
 previous next