Filter
Top Products
9
(MIC)-
Part Names and Functions
② ③①
⑥
⑤
⑧
④
④
Connect the composite video output signal
to this jack (p.15).
②
Connect output signal from a computer,
component video output, RGB scart 21-
pin video output or S-video output to this
terminal. (pp.14-16).
⑥
Connect an external audio amplifier to this
jack (pp.14-16).
This terminal outputs sound from AUDIO IN
terminal.
⑤
Connect the LAN cable (refer to the owner’s
manual of “Network Set-up and Operation”).
①
When the projector is controlled by a
computer, connect to this jack with serial
control cable.
③
– Connect analog RGB output signal from a
computer to this terminal (p.14).
– This terminal can be used to output the
incoming analog RGB and Component
signal from COMPUTER IN 1 /S-VIDEO
IN /COMPONENT IN terminal to the other
monitor (pp.14,16).
⑦
⑦
Connect the audio output signal from
computer or video equipment connected to
② and ③ to this jack. Or connect the MIC to
this jack. (pp.14-16).
⑧
Connect the audio output signal from video
equipment connected to ④ to this jack. For
a mono audio signal (a single audio jack),
connect it to L(MONO) jack. (p.15).
When using AUDIO IN(PC/MIC)
terminal as MIC input, these terminals can
be used for PC audio input.