Filter
Top Products
37
Choose or by pressing the COMPONENT or the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1
2
Computer 1
and then press the Point button.
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a Component-VGA Cable, select
Component.
Component
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with a
Scart-VGA Cable, select .
Press the MENU button to display the On-Screen
and then press the Point or the SELECT button.
When the Input Search function is set to On 1
or On 2, the input signal will be searched
automatically (p.45).
3
Component or
and then press the SELECT button.
Direct Operation
Menu Operation
to select Component or
.