Filter
Top Products
57
Setting
The Information Menu is used for checking the status of the image signal being projected and the operation of the
projector.
Lamp counter
The horizontal frequency of the input signal is
displayed in , or - - - - when no signal.
The vertical frequency of the input signal is displayed
in , or when no signal. Numbers of Hz
doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote control to display
the Information Menu.
Press the Point buttons to select the Information.
The Information Menu is displayed.
See below for displayed information.
Power management
Screen
, or , and are displayed.
The selected screen size is displayed.
Lamp status
The selected input source is displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.
The selected Key lock icon is displayed.
or On1 or On2 is displayed.
The selected remote code is displayed.
Direct Operation
Menu Operation
The serial number of the projector is displayed. The
serial number is used to service the projector.