Filter
Top Products
39
LD-NET ORGANIZER
OWNER'S MANUAL
E-mail setting
2 Registering and deleting E-mail addresses
Click "Add e-mail address" and type the e-mail address
onto the text box and click Set button. To check the
registered addresses, click Check/Delete sub menu tab.
The addresses are listed as the figure on the right.
Up to 10 E-mail addresses can be registered.
To delete the registered addresses, check the address you
want to delete and click Delete button.
3 Option selection for sending alert mail
Click Option sub menu tab. Check the condition items
under which alert mail will be sent and click Set button.
Please refer to item "Examples :Type and contents of alert
mail" described on the next page.
Check / Delete
Option
[1]––––––––––––––––––––––––––––––––––
When power circuit is failed.
When internal temperature is too high.
When internal fan circuit is failed.
When Panel usage time reaches [ ] hours.
[2]––––––––––––––––––––––––––––––––––
W
hen monitor is turned off.
When power save function turns Monitor off
.
When the signal is interrupted
.
When Auto Play is failed
.
If condition "When Auto Play is failed" is
checked, the trap is sent when occurring the
error during the auto display operation using
with the network viewer function (
p.92).
For further information of the error, refer to
item "Auto Display setting and control page
[3]"(
p.95).
Up to 99,999 hours can be set for use time.
If
condition "When monitor is turned off" is
checked, the trap is sent when the monitor
is turned off except Power/Fan fail, High
temp, Power save.