Filter
Top Products
78
Chapter 5 Network Capture
Network Communication operation and change of state
Network Communication can be used under the environment which one or more com-
puters are connected to the monitor via the network.
Preparation
Launch the Network Capture 3 software on the target computer ( p.66). Set the monitor
in the standby or turning on. Check IP address of the target computer is registered in the
connection list ( p.72).
Operation on the Main PC Operation on the Sub PC
On the Communication
1
Executing the command "Start Communication".
The capture editing window appears on the
screen. The icon on the task bar is activated.
Frame
The icon on the task bar is activated to
let users know that the captured image is
now serving.
1 Executing the command "Start Editing".
The capture image on the Main PC
appears on the screen.
Frame
R B
2
Editing the capture image using with the tools.
The editing information is automatically
transferred to the Sub PC.
R
The editing information on the Main PC is
reflected on the Sub PC.
B
3 Releasing the editing authority.
T
he color of authority status frame changes green.
G
The color of authority status frame chang-
es green.
G
T
he color of authority status frame changes blue.
B
2 Acquiring the authority.
The color of authority status frame chang-
es red.
R
The editing information on the Sub PC is
reflected on the Main PC.
B
3 Editing the captured image using with the
tools.
The editing information is automatically
transferred to the target PC.
R
T
he color of authority status frame changes green.
G
4 Releasing the editing authority.
The color of authority status frame chang-
es green.
G
4 Acquiring the authority.
T
he color of authority status frame changes red.
R
The color of authority status frame chang-
es blue.
B
5 Repeat steps 2, 3 if required.
5 Repeat steps 2 to 4 if required.
6
Executing the command "Capture transfer".
Updating the editing window with a new
captured screen image.
R
A new captured screen image appears on
the editing window.
B
7 Repeat steps 2 to 5.
8 Ending the communication.
The capture editing window disappears.
R
The capture editing window disappears.
The monitor displays the edited captured image on the screen when the input mode of the moni-
tor is set "Network".
The command "Save Communication" can be executed in any of the mode even if not having the
authority.
The arrow () shows a response to the command executed.
The execution of the command "End Communication" or "End Editing" on the Sub PC has no
effect on the other target computers.