Filter
Top Products
Unit 3: Installation
CL408-412e Supplemental Manual
3-3 PN: 9001159A
PRINTER INSTALLATION
This chapter provides guidance on how to station, connect, and load the printer once unpacked.
Following printer setup, procede to the next chapter for information on interface selection.
SITE LOCATION
• Stationed on a solid flat surface.
• Stationed away from hazardous materials.
• Stationed within operational distance of the host based on interface specifications.
CABLE CONNECTION
The procedure below provides instruction on typical cable connection. The same procedure will apply to
others that are not mentioned, but their connectors are also performed from the printer’s rear.
Figure 3-2, Cable Connection
Host Computer
Interface Cable
Interface Board
Printer
Power Cord
Power Receptacle