Filter
Top Products
SATO CX Series Printer
99
Label Tear-Off
Label Tear-OffLabel Tear-Off
Label Tear-Off
Command Structure
<ESC>CBabb
Example: <ESC>CB+03
a = + to move the print line down from the
top edge of the label
bb = Distance moved in millimetres
Placement: This command should be sent in a separate
data stream.
Default: Last valid setting.
Command Function
To adjust the location of the first print line on the label.
Input to Printer
<ESC>A
<ESC>CB+03
<ESC>Z
Printer Output
There is no printer output for this command. The first print
line on the next printed label will be adjusted after the receipt
of this command.
Special Notes
1. The value is stored in flash memory and will remain until
it is modified by another valid <ESC>CBabb command,
even if power is removed from the printer.