Filter
Top Products
SATO CX Series Printer
105
Set Sensor Type
Set Sensor TypeSet Sensor Type
Set Sensor Type
Command Structure
<ESC>CIa
a = 0 Disable Sensor
1 Reflective (Eye-Mark) Sensing
2 Transmissive (Label Gap or Notch) Sensing
Example: <ESC>CI1
Placement: This command should be sent in a separate
data stream.
Default: <ESC>CI2 (Transmissive Sensing)
Command Function
To select the top-of-label sensing method.
Input to Printer
<ESC>A
<ESC>CI2
<ESC>Z
Printer Output
There’s is no printer output as a result of this command.
Special Notes
1. The reflective Eye-Mark, label gap or notch must be a
minimum of 3.1mm (.125") wide and extend 21.5 mm
(0.85") from the left (facing the printer) edge of the label
backing.