Filter
Top Products
SATO CX Series Printer
31
Cutter Command
Cutter CommandCutter Command
Cutter Command
Command Structure
<ESC>~aaaa or <ESC><NUL>aaaa
aaaa = Number of labels to print between each cut
(0001 to 9999)
Example: <ES>~0002
Placement: Following the <ESC>Q Print Quantity com-
mand
Default: Cut after each label if cutter installed
Command Function
To control the cutting of labels when using a SATO cutter unit
with the printer. This command allows the cutting of multi-
part tags or labels at a specified interval within a print job.
Input to Printer
<ESC>A
<ESC>H020
<ESC>V020
<ESC>WB1TEST LABEL
<ESC>Q3
<ESC>~002
<ESC>Z
Printer Output
This set of commands will print 6 labels, with 2 labels bet-
ween cuts.
Special Notes
1. You must have the optional printer Cutter installed to
use this function. Contact your SATO representative for
more information
2. To use this command, you must have the cutter enabled.
3. If the cut value is set at aaaa = 0000, the cutter is inac-
tive.
4. When using the Cutter command, the total number of
labels printed is the product of the cut value times the
print quantity. For example, if the cut value is 2 and the