Filter
Top Products
SATO CX Series Printer
17
Base Reference Point
Base Reference PointBase Reference Point
Base Reference Point
Command Structure
<ESC>A3H-aaaaVbbbb
- = This character is optional. When present, it
specifies that the horizontal offset is in the ne-
gative direction. If it is left out the offset direc-
tion is positive.
aaaa = Horizontal Print Offset (-0832 to +0832)
bbbb = Vertical Print Offset (0001 to 1424)
Example: <ESC>A3H100V0050
Placement: Preceding all images that are based on the
new base reference point.
Default: Current V and H offset setting in the printer
configuration
Command Function
To establish a new base reference point for the current label.
The base reference point is the top left corner or “origin” from
where all print position commands are based.
This command may be very helpful when using labels less
than four inches wide to place images on the printable label
surface. It may also be used to move images past pre-printed
fields on a label.
Input to Printer:
<ESC>A
<ESC>L0202
<ESC>H0025
<ESC>V0025
<ESC>WB0MNORMAL REFERENCE POINT
<ESC>A3H0300V0075
<ESC>H0100
<ESC>V0050
<ESC>WB0MNEW REFERENCE POINT
<ESC>Q1
<ESC>Z