Filter
Top Products
Unit 4: Printer Configuration
GL408-412e Operator Manual
4-72 PN: 9001163A
Field Block Width Adjustment. This command allows the user to increase or decrease the width
of field block from the field block command ^FB, so the text line in the block can be broken at a
different word.
The allowable range is -100 to +100 dots, and the factory default is 0 dots.
This menu allows the operator to map the device B: to an External Memory Cartridge or PC
Board Flash.
• B: = EMC - factory default. External Memory Cartridge.
• B: = PCB Flash - PC Board Flash.
Network Identification. Allows the operator to assign an identification number to the network.
• 0 - factory default. Without identification.
• 1 to 999 - a range of numbers to choose for idenfication.
Allows the language to be selected for the character group to represent.
There are multiple languages from which to choose. The factory default is Standard Set.
Allows further language clarification by choosing language options from a group within the
Standard Set of characters.
There are multiple languages from which to choose. The factory default is USA1.
DGL EMULATION MODE (TABLE 4-12)
MENU DESCRIPTION
Permits entry into the EMULATION Mode.
Allows the specific emulation to be selected or if the Select option is chosen, the menu to follow
will contain a list of emulation options available.
Allows the selection of the specific emulation to be selected from a list.
The allowable emulation options are: PGL for Printronics, ZGL for Zebra, TGL for TEC, IGL for
Intermec, SGPL for SATO, and DGL for Datamax.
ZGL EMULATION MODE (TABLE 4-11)
MENU DESCRIPTION
FB Width Adjust
0 dots*
Storage Select
B: = EMC*
Network ID
0*
Character Group
Standard Set*
Standard Sets
USA 1*
EMULATION
EMULATION
Select
Select
DGL*