Filter
Top Products
Unit 6: Maintenance
GL408-412e Operator Manual
6-4 PN: 9001163A
FUSE REPLACEMENT
The fuse is wired to the power receptacle and protects the printer from power surges from the electrical source. If a
surge of electricity reaches the fuse, its filiment will melt creating a disruption of the flow. In order to bridge the gap
so the printer may again be functional, the damaged fuse must be replaced.
To replace the fuse, unscrew the fuse cap from the fuse cylinder, remove the damaged fuse from the cap, and
insert the replacement fuse in its place. Screw the fuse cap back into the fuse cylinder along with the replacement
fuse.
Figure 6-2, Fuse Replacement
NOTE: The orientation of the fuse does not matter. It only has to be installed into its
respective cylinder and be able make contact on each end to function.
NOTE: Fuse amperage and voltage rating may be found stamped into the fuse’s
metal contacts or labeled on the printer’s rear.
CAUTION: IMPROPER FUSE USAGE MAY RESULT IN DESTROYED
ELECTRICAL COMPONENTS AND/OR FIRE. ENSURE THE DAMAGED FUSE IS
REPLACED WITH ONE OF IDENTICAL PHYSICAL DIMENSIONS AND
AMPERAGE. TO DO THIS, DUPLICATE THE INFORMATION STAMPED ON THE
FUSE’S METAL CASING.
Fuse Cylinder
Fuse
Fuse Cap