Filter
Top Products
Unit 4: Printer Configuration
GL408-412e Operator Manual
4-32 PN: 9001163A
This feature provides a graphical printout showing the relationship of the Paper-Out Threshold
and the Gap/Mark Threshold. The profile printed is to assist in setting the thresholds for difficult
media (preprinted labels and labels with poor gap/media dynamic range).
When selected, the printer will advance media and print the media profile along the length of
each label. The factory default is Print Profile.
Displays while the printer is printing the media profile. Will continue to print until the ENTER key is
pressed.
Permits entry into the Power Saver TIme sub-menus.
The user specified time interval for this parameter sets the amount of idle time before the printer
goes into Power Saver Mode. Pressing any key or sending a print job removes the power saver
message from the LCD.
The options are 1, 5, 10, 15, 30, 45, 60, and 240 minutes. The factory default is 15 minutes.
Permit the Power Saver mode to be enabled or disabled as preferred.
• Enable - factory default. Permits the setting from the Power Saver Time menu to become
effective.
• Disable - the power saver feature will not function.
This menu permits the language to be chosen that will appear on the operator panel LCD. The
language options are: English, German, French, Itilian, Spanish, or Portugese.
The factory default is English.
The printer has an integrated audible alarm that may be enabled to alert the user of detected
faults. The manner of audible may also be determined in this menu.
• On - factory default. The audible alarm sounds 3 beeps when a fault occurs.
• Cont. Beep - the audible alarm emits a continuous beep upon the detection of a fault.
• Off - the audible alarm feature is disabled. Sound is not emitted upon a fault detection.
This menu screen will only appear if the real-time clock chip has been installed. If installed, the
menu will allow the time and date to be set. The time and date is expressed in hh:mm
YYYYMMMDD.
hh = hour, mm = minute, MMM = month, DD = day, YYYY = year
Allows the determination of whether the printer will automatically power up in the online state.
• Enable - factory default. The printer powers up in the online state.
• Disable - the printer powers up in the state that conditions dictate.
Permits the determination of whether a cancel key may be used in the offline mode to clear all
data in the print buffer. The deleted data will not be printed. If enabled, the cancel key located on
the host computer keyboard shall be the underscore (_) key.
• Enable - factory default. The cancel key is functional.
• Disable - the cancel key is not functional.
ADVANCED MODE (TABLE 4-3)
MENU DESCRIPTION
ADVANCED MODE
Run Profile
Media Profile
Enter to Stop
ADVANCED MODE
Power Saver Time
Power Saver Time
15 minutes*
Pwr Save Control
Enable*
Display Language
English*
Alarm
On*
Set Calendar
MM/DD/YY
hh:mm
Auto Online
Enable*
Cancel Key
Enable*