Filter
Top Products
Unit 4: Printer Configuration
GL408-412e Operator Manual
4-24 PN: 9001163A
This setting changes the vertical base reference point for the current label job and all subsequent
label jobs. Its effect is identical to the <ESC>A3 Base Reference Point command.
This setting changes the horizontal base reference point for the current label job and all
subsequent label jobs. Its effect is identical to the <ESC>A3 Base Reference Point command.
This parameter allows the printing of bar code descenders when human readable data is not
presented in the UPC/EAN barcodes.
• No Change - factory default.
• Always - factory default. UPC/EAN bar codes are printed with descenders even if human
readable data is not present.
• Never - UPC/EAN bar codes are printed without descenders.
Allows fine adjustment of resolution used to scale page elements/coordinates. In cases where the
printed label length is incorrect, the vertical resolution value used for calculations can be fine
adjusted by this menu between -100 and +100.
Negative values result in a lower DPI value and thusly a longer label. Positive values result in a
higher DPI value resulting in a shorter label. This adjustment does not affect the size of images
and downloaded bitmap fonts.
Allows compatibility with older SATO printer models. By selecting ‘Automatic’ enables the printer
to encode C128 bar code data using automatic mode switching. This action generally results in
smaller barcodes.
If enabled, the printer will beep if an invalid code is deleted in the format file being downloaded/
printed.
Specifies the memory assigned to parameters 1 and 2 of <ESC>CC command.
If the operator panel selection is set to Card, the command <ESC>CC1 declares that the memory
cartridge is to be used to recall/store data (graphic & font) and CC2 is to be used to access
internal flash memory.
If the operator panel selection is to Memory, the above scenrio is reversed.
This menu screen allows the image orientation on the printed label to be determined.
• Portrait - specifies vertical page orientation with page height being greater than its width.
The top-right corner of the image is positioned in the media’s leading right corner.
• Landscape - specifies horzontal orientation with page width being greater than its height.
The top-left corner of the image is positioned in the media’s leading left corner.
• Inv. Portrait - specifies vertical page orientation with page height being greater than its width.
The bottom-right corner of the image is positioned in the media’s trailing left corner.
• Inv. Landscape - specifies horizontal orientation with page width being greater than its
height. The top-right corner of the image is positioned in the media’s trailing right corner.
USER MODE (TABLE 4-1)
MENU DESCRIPTION
Ver BaseRefPoint
0 dots*
Hor BaseRefPoint
0 dots*
UPC Descenders
Always*
Vert. DPI Adjust
0*
C128 Mode Switch
Manual*
Error Handling
Beep*
Mem Select (CC1)
Card*
Orientation
Portrait*