Filter
Top Products
Unit 6: Maintenance
SATO GT4xxe Series Operator Manual PN 9001138C Page 6-10
LABEL SENSOR POSITIONING
The label sensor assembly provides a mounting apparatus for the eye-mark, gap, and paper-end
sensors. Position adjustment of the label sensor is not required when using standard label
media.
When non-standard media is used, place a section of the media on the media ramp oriented as if
loaded for printing. Manually grasp the sensor assembly and move it laterally so that the sensor
indicators embossed in its side are aligned with the reference marks on the media.
Sensor positioning may also be achieved by measuring from the printer’s center frame outward
to a specified distance for sensor/reference mark alignment.
Figure 6-7, Label Sensor Positioning
Center Frame
Label Sensor Assembly
Media Ramp
Eye-Mark Sensor Indicator
Gap Sensor Indicator