Filter
Top Products
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138C Page 4-43
SERVICE MODE (4-19)
MENU DESCRIPTION
The Maintenance Mode is divided into two sections; the Service
Mode and the Factory Mode.
The Service Mode allows the programming of various
dimensional settings, sensor thresholds, and language options.
The Factory Mode permits counter reset of various printer
components. Use the keys of the printer’s operator panel to
select and reset those features.
Allows sensitivity adjustment of the eye-mark sensor.
Allows slice level adjustment of the eye-mark sensor.
Allows penetrating sensor adjustment of the gap sensor.
Allows slice level adjustment of the gap sensor.
Select the ENABLE option to set the printer to automatically
notify when media is nearly exhausted.
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
SENSOR LEVEL
I-MARK X.XV
LEVEL OFFSET 50
SENSOR LEVEL
I-MARK X.XV
SLICE LEVEL 1.0V
SENSOR LEVEL
GAP X.XV
LEVEL OFFSET 50
SENSOR LEVEL
GAP X.XV
SLICE LEVEL 50
LABEL NEAR END
ENABLE DISABLE