SATO GT408 Printer User Manual


 
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138C Page 4-28
This feature allows one label to be fed upon the printer being
powered on. Enable or disable as desired.
This feature allows one label to be fed following an error being
corrected and the printer going online.
The ESC sequence in SBPL commands may be defined as
standard (using non-printable code 1BH) or non-standard
(some other user code).
The printer may be set to go to SEMBL Mode automatically (to
execute a preloaded Basic program) upon being powered on.
If the SEMBL Mode auto-start feature is enabled, this screen
will appear to permit specification of the program to be
executed.
ADVANCED MODE (4-3)
MENU DESCRIPTION
AUTO ONLINE FEED
YES NO
FEED ON ERROR
YES NO
PROTOCOL CODE
STANDARD
NON-STANDARD
SEMBL MODE
AUTO START
YES NO
START PROGRAM
OWN_PROG.BAS
SAMPLE_1.BAS