Filter
Top Products
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138C Page 4-19
PRINT DARKNESS DEFAULT MODE
Figure 4-18 provides the specific sequence of events required by the operator, the printer, and
the printer’s software to return to the print darkness (density) setting as received from the factory.
Use the keys of the printer’s operator panel to select and enter the required options.
Figure 4-18, Print Density Default Mode
Change Print Head
POWER
Printer
beeps
Select Yes then
press ENTER
PASSWORD
0000
DEFAULT
SETTING
COMPLETED
PLEASE POWER OFF
POWER OFF
HEAD CHANGE
08->12 [dot / mm]
YES NO
Type 0003 then
press ENTER