Filter
Top Products
Direct Printing from a Digital Camera (PictBridge)
129
4
PictBridge Printing
Follow the procedure below to start PictBridge printing on this machine.
Important
❒ Do not disconnect the USB cable while data is being sent. If you do, printing
will fail.
❒ The USB host interface board is supplied with a USB cable and a hook onto
which you can roll up and hang the cable.
A Attach the hook on the back of the machine near the USB connection slot.
Attach the hook where it will not interfere with machine operation and access.
B Check the machine and the digital camera are both switched on.
C Connect a USB cable between the optional USB host interface board in-
stalled on the machine and the digital camera.
The Data In indicator on the machine blinks for several seconds and “Pct-
Brdg” is displayed on the machine. This indicates the machine recognizes the
digital camera as a PictBridge device.
D Secure the USB cable using the hook.
E On your digital camera, select the images you want to print, and specify the
printing conditions.
AQF072S
AQF073S