Savin C3535 Printer User Manual


 
Preparing the Machine
52
1
When connected with the network
The machine must support bidirectional communication.
SmartDeviceMonitor for Client included on the CD-ROM must be in-
stalled, and TCP/IP must be used.
Under Windows 2000, [Enable bidirectional support] must be selected, and
[Enable printer pooling] must not be selected on the [Ports] tab with the RPCS
printer driver.
In addition to the above, one of the following conditions must also be met:
The SmartDeviceMonitor for Client port and the TCP/IP protocol must
be used.
The standard TCP/IP port must be used without changing the default
port name (for Windows 2000 / XP and Windows Server 2003).
Microsoft TCP/IP print IP address must be specified for use (for Win-
dows NT 4.0).
IPP port name must include the IP address when using the IPP protocol.
When connected with IEEE 1394
The computer must support bidirectional communication.
The machine must be connected to the IEEE 1394 connector of a computer
using the IEEE 1394 interface cable.
[Activate] must be selected in the SCSI print of IEEE 1394 and [Activate] must
be selected in the Bidi-SCSI print.
Under Windows 2000 / XP or Windows Server 2003, [Enable bidirectional
support] must be selected, and [Enable printer pooling] must not be selected
on the [Ports] tab with RPCS printer driver.
When connected with USB
The machine must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.
Note
Install SmartDeviceMonitor for Client from the supplied CD-ROM.