Filter
Top Products
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 76
To add a MAC filter:
1. Click Add to open the dialog box.
2. Specify the MAC address, then click OK.
3. Repeat the steps to filter additional MAC addresses.
IP Filter / MAC Filter Conflict. If there is a conflict between an IP filter and a MAC filter (a computer's
address is allowed by one filter but blocked by the other) then the blocking filter takes precedence (the
computer's access is blocked).
Modifying Filters. To modify a filter, select it in the IP Filter or MAC Filter list boxes and click
Modify. The Modify dialog box is similar to the Add dialog box. When it opens, delete the old
address(es) and replace with the new address(es).
Deleting Filters. To delete a filter, select it in the IP Filter or MAC Filter list box and click Delete.
Login String. The Login String entry field lets the super administrator specify a login string (in addition
to the IP address) that users must add to the IP address when they access the KVM switch with a
browser. Example: if 192.168.0.126 were the IP address, and abcdefg were the login string, the user
would have to enter: 192.168.0.126/abcdefg
Note: 1. Users must place a forward slash between the IP address and the string.
2. If no login string is specified, anyone can access the KVM switch login page using the IP
address alone, making the installation less secure.
• The following characters are allowed in the string: 0-9 a-z A-Z ~ ! @ $ & * ( ) _ - = + [ ] , . |
• The following characters are not allowed: % ^ " : / ? # \ ' { } ; ' < > [Space]
• Compound characters (É Ç ñ ... etc.)
For security purposes, it is recommended that the string be changed occasionally.
Account Policy
System administrators can set policies governing usernames and passwords.
Entry Explanation
Minimum Username
Length
Sets the minimum number of characters required for a username. Acceptable values are
from 1-16. The default is 3.
Minimum Password
Length
Sets the minimum number of characters required for a password. Acceptable values are
from 0-16. A setting of 0 means that no password is required. Users can login with only a
Username. The default is 3.
Password Must
Contain At Least
Checking any item in this section requires users to include at least one uppercase letter,
one lowercase letter or one number in their password.
Note: This policy only affects user accounts created after this policy has been enabled,
and password changes to existing user accounts. Users accounts created before the policy
is enabled, and existing passwords that have not been changd, are not affected.
Disable Duplicate
Login
Check to prevent users from logging in with the same account at the same time.