Filter
Top Products
35011984 02/2006 19
4
Establishing a Connection to the
TSXCUSBMBP
At a Glance
Subject of this
chapter
The TSXCUSBMBP Driver is added to the Startup group during installation. After restarting
the computer at the end of the hardware installation, the driver will automatically start and will
continue to do so each time the computer is powered up or restarted.
If the TSXCUSBMBP Driver is ever removed from the Startup menu, you will need to
start the driver manually by going to the Programs menu and selecting Schneider Electric
then TSXCUSBMBP then TSXCUSBMBP Driver. The TSXCUSBMBP Driver allows for
only one instance of it to run at any time, so starting it multiple times is not a concern.
Status of the
Driver
When the TSXCUSBMBP Driver is running, an icon will appear in the system tray of
the computer to indicate the status of the driver, as shown in the table below.
What's in this
Chapter?
This chapter contains the following topics:
Icon Color Status of the driver
normal A TSXCUSBMBP was found.
red No TSXCUSBMBP was found.
yellow A TSXCUSBMBP was found, and is in the process of initializing and
connecting to a Modbus Plus network.
Topic Page
Rescan Adapters 20
Show Interface 20