Filter
Top Products
Configuring the TSXCUSBMBP Driver
26
35011984 02/2006
Configuring the Virtual Serial (COM) Port
Introduction The Virtual Serial Port used by the application to send Modbus requests to the
TSXCUSBMBP Driver will default to COM3 during installation.
COM3
Assignment
If another device is already installed on COM3, the Virtual Serial Port will need to
be changed.:
Port Changing To change the port reference for the Virtual Serial Port in the application:
If... Then...
another device is already installed on COM3
the Virtual Serial Port will need to be changed
1 If an application is open that is using the Virtual Serial Port to communicate with the
TSXCUSBMBP, it should be closed.
2Select Virtual Modbus Port from the top level menu on the TSXCUSBMBP Driver
Interface Window.
3 Select the desired COM port from the list of available COM ports.
4 Click on the Save button to save the new setting.
Note: The new setting will take effect immediately upon pressing the Save button.
The application being used with the TSXCUSBMBP must be configured to
communicate using the serial port configured here.