Filter
Top Products
Configuring the TSXCUSBMBP Driver
35011984 02/2006 31
Entering Routing
Paths into the
Routing Table
Use the following procedure to change an entry in the Routing Table:
Step Action
1
Select
Routing
from the top level menu on the TSXCUSBMBP Driver Interface window.
2 Select the entry to be changed in the table by left clicking on it (the entry will become
highlighted)
3 Enter the Modbus ID and the associated Modbus Plus Routing Path in the fields below
the table.
4 Click on the Update button to update that entry in the table. You will see the entry in
the table above change to the new values.
5 Repeat steps 2-4 for each entry to change in the Routing table.
Note: Clicking on the Close button will save all Routing Table entries and return to the
top level menu. The new Routing Table will take effect immediately.