Schneider Electric TSXCUSBMBP Webcam User Manual


 
Configuring the TSXCUSBMBP Driver
35011984 02/2006 23
Configuring the Modbus Plus Node Address
Address
Assignment
The TSXCUSBMBP communications adapter must be assigned a Modbus Plus
Node Address in order to communicate on the Modbus Plus network.
The Modbus Plus Node Address assignment window is displayed:
Address
Configuration
To configure the Modbus Plus Node Address of the TSXCUSBMBP device:
Address
Changing
Process
After the Save button is pressed, the process of changing the Modbus+ Node
address of the TSXCUSBMBP device will begin.
To complete this process, the TSXCUSBMBP device must be reinitialized.
z An information window will pop up, designating that the node address is being
changed, and it will take approximately 10 seconds to complete the process.
z Click on OK to exit the information window.
The Settings Menu will remain disabled until the process of changing the node
address is complete.
After the process has completed, the Modbus Plus cable can be connected to the
TSXCUSBMBP device without risk of a duplicate Modbus+ node address on the network.
Step Action
1
Select
Settings
from the top level menu of the TSXCUSBMBP Driver Interface Window
2 Type the new address into the field labeled Modbus+ Node Address
3 Click on the Save button to save the new address.