Filter
Top Products
Configuring the TSXCUSBMBP Driver
35011984 02/2006 29
Routing Example Routing example:
The following table shows the routing table entries that must be made to route
messages to the PLCs at Modbus Plus Node Addresses 1, 2, 3, 10, 15, and 16.
Bridge
Plus
43
Bridge
Plus
23
PLC
16
PLC
15
TSX-
CUSB
5
PLC
10
PLC
2
PLC
1
Bridge
Plus
20
PLC
6
PLC
3
20
5
9
Modbus +
Node
Address
Slave ID
used by
application
TSXCUSBMBP
Routing Table
Entry
Modbus Plus Routing Path
1 231 None Required 23.1.0.0.0 as determined through Implicit Addressing If desired, Explicit
Addressing could be used by selecting an unused Modbus ID and
placing an entry for that Modbus ID into the Routing Table going to
23.1.0.0.0
2 232 None Required 23.2.0.0.0 as determined through Implicit Addressing If desired, Explicit
Addressing could be used by selecting an unused Modbus ID and
placing an entry for that Modbus ID into the Routing Table going to
23.2.0.0.0
3 233 None Required 23.3.0.0.0 as determined through Implicit Addressing If desired, Explicit
Addressing could be used by selecting an unused Modbus ID and
placing an entry for that Modbus ID into the Routing Table going to
23.3.0.0.0
6 26 Modbus ID 26,
Routing Path
23.20.6.0.0
23.20.6.0.0 as determined through Explicit Addressing from the
Modbus Routing Table
10 10 Modbus ID 10,
Routing Path
43.10.0.0.0
43.10.0.0.0 as determined through Explicit Addressing from the
Modbus Routing Table